Variation of the housing for the BCI BusyLight
5h 8m
5× print file
0.20 mm
0.40 mm
43.00 g
0
7
0
255
updated October 18, 2022

Description

PDF

I have created housing variations for the BCI BusyLight that I would like to share with my colleagues here.

This variant is designed to attach the BusyLight to the top of the monitor. For this purpose, the design has a hook, which you should print in the appropriate width depending on the thickness of the monitor used.

Test the printed hook on the monitor before you plug it together with the housing, because the hook, once plugged together, is extremely difficult to release again.

Since there are monitors in various thicknesses, I can not offer all the required hooks here. If necessary, please leave a comment here, or contact me via my business email address, then I will provide the required variant here additionally.

The LED strips have a length of about 50 cm. I chose the radius of the spiral construction to fit this length exactly with 2 spiral turns.
Peel off the protective layer from the adhesive strip on the back of the LED strip and then stick the LED strip onto the construction in a spiral.
Start at the top position and place the LED strip exactly at the edge, because the width of the construction is also designed exactly to the width of the LED strip used.

Support structures are required for the print of the spiral design. Depending on the print result, it may be necessary to rework the areas that have been in touch with the support structure with sandpaper.

The lid also requires support structures, but due to its small size these are of little relevance.

Links to other variants:
- (v1) https://www.printables.com/de/model/282112-bci-busylight-v1
- (v2) https://www.printables.com/de/model/282117-bci-busylight-v2
- (v4) https://www.printables.com/de/model/295413-bci-busylight-v4-with-stand-standfuss
 

Tags



Model origin

The author hasn't provided the model origin yet.

License