Raspberry Pi4 stepper motor mount for Ender 3 S1

A Raspberry Pi mount designed to be secured onto the left Z axis stepper motor of a Ender 3 S1
2
13
0
429
updated September 24, 2022

Description

PDF

A Raspberry Pi mount designed to be secured onto the left Z axis stepper motor of a Ender 3 S1

Materials needed:

3x M3 nut

3x M3x6mm or M3x5mm screws

There is 3 hex-shape indents on the adapter_mount for M3 nuts, install the nuts by pressing it in. Aline the 3 holes on the adapter_mount with the 3 holes on the raspberry pi adapter before securing the two parts with M3 screws. Unscrew two of the screws found on the top of the left Z axis motor, install the adapter and screw back the two screws, making sure the mounting hole lines up. Use a longer M3 screw when mounting the adapter onto the stepper motor if needed.

Refer to the pictures above if needed

If the hex indent is too small, press the nut down with a soldering iron to fuse it in place.

The optional included raspberry pi cover is made for the Ice Tower Low profile cooler, it has just enough clearance to friction fit in place over the pi_holder mount without being too tight to remove. a smaller frame style mount is also available if you want your raspberry pi to be more exposed.

This is my first upload, feedback is very much appreciated, Thank you! 

Tags



Model origin

The author hasn't provided the model origin yet.

License