Coffin Planter (Halloween)

I printed these at 150% for small succulents. At 200% it would make a very decent sized succulent planter. 

I created this in Tinkercad in about 5 minutes, so the design is just a very basic coffin.

Comes with a slightly deeper tray STL if you want to add feet to the coffin for drainage.

The tray is currently set at a pretty tight tolerance in comparison to the coffin. If you have difficulty with fitting the original lid, you may want to increase the size in your slicer slightly. 

The license for this file is Attribution - ShareAlike 
Please read https://creativecommons.org/licenses/by-sa/4.0/

This means that you are free to:
	Share — copy and redistribute the material in any medium or format
	Adapt — remix, transform, and build upon the material
	for any purpose, even commercially.

Please support Attribution -ShareAlike by sharing your designs with others!

 Thank you for your interest in this design! Enjoy!