Sdkfz 231-6 Rad

A quick model of the German Sdkfz 231 6Rad from WW2 scaled to 1/100

print 4 sets of rear wheel and 2 sets of front one turret and the main body.

the rear wheel s locate happily but for some reason the hole on the front wheels isn't there, but a dab of glue and no problem, you could even turn the wheels easier like this.

print body and turret flat for best results.

UPDATE

Sorry folks noticed the turret was coming out hollow, have now attached a fixed file

'Turret2new.stl' please use this if you are having problems.

Sorry again