RaspberryPi Case with IR Pi Camera for Anycubic i3 Mega S

This RaspberryPi Case for an Anycubic i3 Mega S was adapted and remixed from Raspberry Pi 3 Case without Vesa mounts and Raspberry Pi case with Pi Camera for CR-10.

It uses a RaspberryPi 3 with OctoPi and a MakerHawk Raspberry Pi Cam with IR lights so you can watch your print at night.

The case is mounted on the i3 Mega S spool holder and has an arm for the IR cam.

You will need M3 nuts and screws for the top of the case, the camera arm and the spool holder and M2.5 screws to screw the RaspberryPi board onto the case bottom.

Print Settings

Printer Brand:

Anycubic

Printer:

All-metal Mega

Rafts:

No

Supports:

Yes

Infill:

50

Filament:

Doesn't matter PLA

Doesn't matter

Notes:

You will need support only for the camera arm parts.

Print 20mm_mount_arm.stl and 20mm_mount_arm_90.stl two times for the arm.

Category: 3D Printer Accessories