Clever grommet - parametric FreeCad

Holes are important but can be ugly. This clever grommet makes any hole in sheet material smooth and attractive!
23m
6× print file
0.15 mm
0.40 mm
2.00 g
61
141
1
720
updated September 19, 2022

Description

PDF

Holes drilled in plywood, MDF or chipboard can have unpleasant edges. This grommet is easy to apply and is the finishing touch to your work. The two parts are identical and fit into each other along a faint spiral. Once pressed together they can only be released bij turning, which normally is not an applied power.

As always this is a parametric FreeCad file, meaning that you can change the depth, width, flange, or whatever, as you like. For those who are not into CAD drawing there are .stl and print files for sheets of 18 and 9 mm thick and holes of 35, 30 and 20 mm in diameter.

The print files are for PLA and have an infill of 80 %. It is also a good stringing test ;)


 

Tags



Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more