WiFi Sync Clock 2

Two hand analog clock with automatic time adjustment using NTP via WiFi.

Contrary to the former WiFi Sync Clock, this clock works normally with monotonic CW rotation (except origin alignment once a day).

• It resets the position of hands once a day at 0:00 (and initialization period after power on). The hands of the clock rotates CCW (counter clockwise) and stopped mechanically at 0:00.
• Owing to the special hook mechanism, it can precisely align the position of the hands.
• ESP32 microcontroller connects to the time server (ntp server) via WiFi.

Video

You need

• ESP32 based micro controller with WiFi. I used "MH-ET LIVE MiniKit" type ESP32-WROOM-32 board (around 5USD).
• 28BYJ-48 geared stepper motor and its driver circuit (around 3USD)
• M2 and M3 tapping screws

How to make

• Print all parts with supplied posture. No support needed.
• Remove debris and blobs from the parts well. Especially, all axes of hands should be smooth.
• Please be careful not to use too long screws.

How to use 

WiFi setting

You can configure your WiFi to the micro controller by two ways : Smartconfing or Hard coding.

Smartconfig

1 Settrue to the flag named WIFI_SMARTCONFIG at line #7 in the source code,

#define WIFI_SMARTCONFIG true then compile and flash it to the micro controller.

2 Install the apps for setting WiFi. The apps are at

• Android: https://play.google.com/store/apps/details?id=com.khoazero123.iot_esptouch_demo&hl=ja≷=US
• iOS: https://apps.apple.com/jp/app/espressif-esptouch/id1071176700

3 Power on the clock and wait for a minute. The status of WiFi connection is indicated by the motion of the second hand.

• Large reciprocal motion : connecting to WiFi using previous setting stored in non-volatile memory.
• Small reciprocal motion : SmartConfig mode. If 30 seconds of WiFi connection trial fails, it automatically moves to the the smartConfig mode (waiting for the configuration from smartphone app.)

4 Set the password of your WiFi using the app as shown above.

Please not that your smartphone should be connected to 2.4GHz WiFi. Configured WiFi settings are stored in non-volatile memory and are kept even when the power is turned off.

Hard coding

1 Setfalse to the flag named WIFI_SMARTCONFIG at line #7 in the source code,

#define WIFI_SMARTCONFIG false 2 Then you can set SSID and password of your WiFi in the source code directly at lines #11-12,

#define WIFI_SSID "SSID" // your WiFi's SSID #define WIFI_PASS "PASS" // your WiFi's password 3 Compile and flash it to the micro controller.

Category: Gadgets