Another CR-10 Z Support Brace

This is a Z brace I created which used some Home Depot parts and M4 screws and nuts I had on hand. It will restrict the Z height to be about 50mm less, but for my purposes, that was still more than enough for me.

The parts are

Two 3/8"-16 x 24" Rods https://www.homedepot.com/p/Everbilt-3-8-in-16-tpi-x-24-in-Zinc-Plated-Threaded-Rod-802167/204274007

Eight 3/8" Nuts https://www.homedepot.com/p/Everbilt-3-8-in-16-Zinc-Plated-Hex-Nut-801756/204647890

Eight sets of 30mm M4 Screws and Bolts https://www.amazon.com/gp/product/B08H23VXCY

Eight sets of about 10mm M4 Screws and Bolts

(Still on order)

Eight sets of M4 T-nuts

(Still on order)