I've created filament clips here that at least hold up. I had already tested a few, but many of them all went down over time. I have now improved the holders a bit. The mount is now slanted, which means the filament holds a little better. These are also fixed to the inner ring. Designed for standard 250g, 1kg and Sunlu rolls. Best printed with PETG or similar, as it is more flexible than PLA. 0.2mm layer height. Wall thickness 4, then you have no filling. But everyone has to know for themselves.
Ich habe hier mal Filament Clips erstellt, die wenigstens halten. Hatte schon einige getestet, aber die vielen alle mit der Zeit runter. Habe jetzt die Halter etwas verbessert. Die Aufnahme ist jetzt schräg, dadurch hält das Filament etwas besser. Diese werden zusätzlich noch am Innenring fixiert. Ausgelegt für Standard 250g, 1kg und Sunlu Rollen. Gedruckt am besten mit PETG oder ähnlich, da flexibler als PLA. 0,2mm Schichthöhe. Wandstärke 4, dann hat man keine Füllung. Muss aber jeder selber wissen.
The author marked this model as their own original creation.