Installation of inductive sensor M8

Installation of inductive sensor M8 / Montáž indukčního snímače M8
3h 10m
1× print file
0.20 mm
0.40 mm
31.00 g
In the contest Mechanical Marvels
17
26
0
694
updated September 12, 2022

Description

PDF


 

[ENG]
Easily adjustable mounting for inductive (or capacitive or optical) sensors in a standard M8 housing with a setting range> + - 5mm on an Rexroth-Bosh 45x45 aluminum profile.

The assembly consists of three printed parts. The lower and upper part is used for attachment to the profile and they are mounted smoothed logs 8mm long 70mm. The upper part also has a sealed M3 threaded insert (DREMEC DR11M3) for the adjusting screw.

4 M6x16 flat head screws (diameter 16 mm) provided with nuts for profiles are used for fastening to profiles. You also need 1 piece of M3x25 screw to adjust the position. To secure the sensor, there are 3 self-tapping screws for plastic 3x15, or after cutting the threads of the classic M3x15.

Two springs with an inner diameter of 8.5 mm and a length of approx. 30 mm at rest (10 mm fully compressed) are used to create the return resistance of the trolley with the sensor. For easy operation, it is advisable to pass the guide holes of the trolley through an 8mm reamer.

 

[CZ]
Jednoduše nastavitelná montáž pro indukční (případně kapacitní, či optické) snímače ve standardním pouzdře M8 s rozsahem nastavení > +- 5mm na hliníkový profil Rexroth-Bosh 45x45.

Montáž se skládá ze tří tištěných dílů. Spodní a horní díl slouží pro uchycení k profilu a jsou v nich upevněny hlazené kulatiny 8mm dlouhé 70mm. V horním dílu je taktéž zatavená závitová vložka M3 ( DREMEC DR11M3 ) pro nastavovací šroub.

K připevnění k profilům slouží 4ks šroubů M6x16 s plochou hlavou (průměr 16mm) opatřené maticemi do profilů. Dále je potřeba 1ks šroubu M3x25 pro nastavování polohy. Pro zajištění čidla slouží 3ks samo řezných šroubů do plastu 3x15, Případně po vyříznutí závitů klasické M3x15.

Pro vytvoření zpětného odporu vozíku s čidlem jsou použity dvě pružiny s vnitřním průměrem 8.5mm a délkou cca 30mm v klidovém stavu (10mm zcela stlačené). Pro snadný chod je vhodné protáhnout vodící otvory vozíku výstružníkem 8mm.

Tags



Model origin

The author marked this model as their own original creation.

License