USB-C PD Trigger Module Housing

Made a housing for the USB-C PD module I use to power my soldering iron from my laptop charger (or any other available source). Looks a bit nicer than wrapped in electrical tape as it was the last year. Photo of the v1 but don't have the file for that one anymore, only difference is removing some unnecessary material to decrease printing time and size of the case.

Bottom part is sized exactly for the USB PD module I used from Aliexpress:

https://www.aliexpress.com/item/4000827150387.html

For smallest size I soldered the wire directly and did not use the terminals.