WE GBBR Speedloader

Designed this to use as a speedloader for WE GBBR magazines. Holds 30 rounds and with the plunger effortlessly pushes the BB´s in to the magazine.

It has a witness hole near the open end of the tube so you easily see when you have reached capacity and has an o-ring in the loader end to retain the BB's before loading.

Recomended printed orientation is as shown in the slicer screenshot.

All it needs is an o-ring with an inner diamter of 5mm and a thickness of 2mm to give enough resitance that keeps the BB's from falling out.

Edit: Have added a shorter adapter for use with the regular small quickloader as well as a plunger with a narrower blade for a bit looser tolerance with the tube.

Note: This is designed around and tested on WE M4/STANAG GBBR Magazines only. It is possible it fits other brands/types but I leave no guarantiee that it does.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

25

Filament: Azure Film PLA Black

Notes:

If

I haven't done any long term testing with PLA as a material, it is probably better to use a sturdier material parts longevity.

Category: Sport & Outdoors