Hinged lid for adding MMU2S to Original Prusa Enclosure

Printable accessory, providing access to the printer and MMU from the top. Designed for the Original Prusa Enclosure.
8h 32m
2× print file
0.30 mm
0.40 mm
164.00 g
944
8385
221
28 k
updated April 5, 2024

Makes

Comments

Printed in red PETG in preparation for enclosure build!

Used some glow in the dark PETG.

Excellent print and instructions. It makes working on the MMU a lot easier!

These hinges and handle are really great. Even with the filament box on top I can open it and get to the MMU from the top when needed. Thanks so much for the great design!

View one more comment

Probably the best mod for the enclosure!

Printed in Prusament PETG. Printed everything except the handle

Thx for your model.
One of the things you need for enclosure
Print: PETG 250/90 - 0,4 nozzle - 0,2 layer height