Aperture Science Weighted Cube (Portal 1)

Weighted (Companion/Cargo) Cube from Portal 1.

Based on a diagram Dionogard posted in 2015.  I couldn't get any of the project files to load, so the dimensions on the logo disc might be slightly off.  Had a fun time learning Fusion 360 well enough to be able to do this!

The F360 project has the cube scaled at its full size of 2 feet (~60cm), but I've exported an .STL at ¼ scale.  The model is solid, so if you're not into very long prints, maybe reduce the infill to 5-10%.  Supports are probably a good idea, especially if you're printing bigger than ~3" or so.

I found the diagram at https://www.turbosquid.com/3d-models/free-obj-model-weighted-companion-cube-portal/917892, but it looks like the original may have been from DeviantArt: https://www.deviantart.com/dionogard/art/2-foot-Weighted-Companion-Cube-3D-Model-link-485290833 

Feedback welcome!  I'm largely self-taught in Fusion 360 (though I did get some amazing help on the Autodesk forums).