Bambu Lab X1 AMS Riser frame with Led's

Ok Be nice this is my first upload 

I remixed parts from 

1 https://www.printables.com/model/265701-bambu-lab-x1c-light-frame

2 https://www.printables.com/model/265788-bambu-lab-x1c-ams-foot-extension

what i was was hoping to achieve was a led profile and riser in one 

as a result of this the complete frame was to big for the printer so it had to be done in parts and glued together which shouldn't be a problem if you first glue the riser to the led profile with the curve end  then you can use a object which has a 90 degree on it to help you line up the shorter led profile or use my attempted template jig to help you just be careful not to glue it to the frame 

I used supports on the risers just at the parts which would connect to the led profile

the led strip was a 5v cob with dimmer https://www.amazon.co.uk/gp/product/B08X77WZF9/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&th=1

there is also a hole in each riser to run a cable to solder to the led strips