Standalone CR10-V3

So, I have to move my printers when I do metal working otherwise, I have to clean metal dust off of them.  My shop is small and have limited workspace.  I wanted the challenge of working within the scope of the original design (no foot mod).  you will need to get longer power cables and screen cables.  also, a SD card extender, no, I did not include a SD card extender there are too many different extenders to do that.  I also made sure that they fit on an Prusa mk3 or even, what I used for the case, a Elegoo Saturn.   The screen is part of my metal working experience, so maybe use screen off thing:2841111, or get into metalworking! 

on a separate note, don't use cable chains on cable not rated for flexing.  Instead use a spring and some zip ties to keep it up out of the way.