Inspired by various models on the subject of tensegrity, I have designed another one ...
... a construction that represents a conventional round table. Dimensions: tabletop Ø150mm, base Ø 80mm, height about 140mm.
To increase stability there are 4 clamping points. As tensioning threads I took a nylon thread Ø 0,35mm. The attachment is extremely tricky and for people without endurance only conditionally recommended ;-) Dental floss also does the job. In any case start with the middle parts. The distance there in the thread area should be about 20mm.
The middle parts hold without any glue. Otherwise you can fix them with superglue.
Annotation referring to the insertion of the middle parts: It often happens that the lowest layers bulge outwards. This is called „elephant foot“. It occurs quite often, because even the smallest changes in the pressure parameters can cause this problem. Carefully file or cut the edges of the hole to make absolutely sure that all build plate „elelephant foot“ is removed.
Have fun printing and looking at it ... it’s somehow fascinating!
Keep well!
Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Resolution:
0,2
Infill:
20%
Filament_brand:
Prusa
Filament_color:
Galaxy Black, Silver
Filament_material:
PLA
The author marked this model as their own original creation.