Sharpening Jig for Chisels and plane irons

Jig for sharpening of chisels, plane irons and similar.

Print instructions:

Material: PETG (PA, PC might be a good fit too)

Layer height: 0.2 (0.15 should work fine too)

Baseplate:

• Infill: 15% - 20% Honeycomb
• Perimeter: 3

Top:

• Infill: 70% Gyroid (there is Infill only around the bolts)

2x Knob:

• Perimeter: 3

Additional required parts:

• 2x M8x30 DIN933 / ISO4017 Hex Screw
• 2x M8 DIN934 / ISO4032 Hex Nut
• 4x M5x12 DIN912 / ISO4762 Hexagon socket Head Cap Screws
• 4x M5 DIN934 / ISO4032 Hex Nut

Inspired by: