Mapped Maze

TolModifier does not need to be printed! see printing instructions

Description

Works with 3 mm diameter ball (e.g. bearing ball)

The goal is to get the ball from the bottom left corner to the bottom right corner (easier) or reverse (harder)

The maze was generated with python code: https://scipython.com/blog/making-a-maze/

Printing instructions:

• The walls of the maze are around 0.9 mm so I think the optimal layer height is 0.2 mm
• Currently there is no tolerance between the maze and the map for snap fit installation. 
  There is a model named TolModifier: when you print the map you can add this model as negative volume and then resize it to easily adjust the map to the desired tolerances.
  Only adjust the x and y dimensions!