This is my complement to this design: https://github.com/VoronDesign/VoronUsers/tree/master/abandoned_mods/printer_mods/edwardyeeks/Decontaminator_Purge_Bucket_%26_Nozzle_Scrubber
When you're printing a full plate on the Voron 2.4 you can't scrub the nozzle. The brush is too low and you may hit some parts resuming. It would be useful especially if you change filament or use PETG. I designed a bracket to be installed on the back of the gantry. It reuses the same brush holder. The only down side is that you can't use the bucket anymore.
You will need:
2 M5 hammer Tnuts;
4 M5x16 SHCS bolts;
2 M5 nuts;
2 M3x12 bolts;
2 M3 nuts and
the brush holder.
Once installed you can adjust the X,Y and Z position to match. You will also have to print another plate stopper. Everything else is in the macro.
The author hasn't provided the model origin yet.