Card Tray (Draw/Discard) for Uno, Five Crowns, Skip Bo etc.

This is a simple little deck holder I designed to fit the cards for simple card games. My sons love playing Uno and the deck kept falling over. All the card holders I could find were made for Bicycle playing cards and were far too big and the cards still fell out. I designed this with a chamfer to guide the cards into place, plenty of room to draw from any angle, but enough wall space to keep the cards in line. This should work for any cards 59mm x 90 mm or less. I have tested this on the following games: Five Crowns, Uno, Skip Bo, Sushi Go, Phase 10. Be sure to check your card size!

If you want it slightly bigger or smaller just add or subtract 2 mm for each 1 mm you want to add to the long side, or 1 mm for the short side.

Happy Gaming!

If you like games check out my Etsy shop Taylor Jane Design Co.