Gridfinity soldering-iron & brass-wool holder

A Gridfinity compatible 1x2 slot holder for brass-wool & a soldering iron
223
563
19
4440
updated October 3, 2023

Description

PDF

This is a little Gridfinity model I have made that can hold your active soldering iron, and has a tray for a brass cleaning wool type thing.

I'm using it for my Pinecil (V2), but it should also work with the TS-100, and similar small-sized soldering irons.

i used a generic 608 bearing for the ring.

 

UPDARE 03.10.2023:

  • Increased bearing diameter from 22.0mm to 22.1mm

 

UPDATE 29.09.2023:

  • Made the ring thicker again
  • Added a small lip to the bottom of the ring to prevent the bearing from falling out

 

UPDATE 02.04.2023:

  • Made the sidewalls a lot higher, so that little bits of solder don't shoot out as easy.
  • Reduced the thickness of the ring.

 

UPDATE 24.02.2023:

  • Added version for M3 Countersunk screws

 

UPDATE 21.02.2023:

  • Remade the entire F360 project file using this Gridfinity Add-in for Fusion 360.
  • F3D & STEP files are now proper project files.
  • The bin now has proper Prusa-style screw holes!
  • Some dimensions are now slightly different.

 

 

 

 

Tags



Model origin

The author marked this model as their own original creation.

License