Ozpin Cane Top "Jewel"

Printed this thing: http://www.thingiverse.com/thing:705243

In the UK looked everywhere for imperial sized pipe, ended up with wilkos metal roller painting extension and using masking tape to convert it to imperial diameter. Used chop saw to take the end stop and 10cm off end of metal tube. Lightly sanded the tube to allow spray paint to bond. Had some grey undercoat spray paint from pound shop to paint the tube (staff).

Didn't have a "dolls head" as suggested by original, so created an end piece and printed it in glow in the dark PLA.

Other parts printed in gold and gray PLA on Printrbot printer.

Had to break up the finger guard and then glue it back together to print on the bed size of the Printrbot.

Chiselled the grooves from the end of the roller tube before painting.

Instructions

Printed the end jewel with 20% fill with glow in the dark PLA.

No support required.