Single Vinyl Record Wall Stand

A single, 3in wide stand for displaying a vinyl record on a wall. UPDATE: Added non slanted version
21
98
0
920
updated November 5, 2022

Description

PDF

I printed this with 20% infill and a raft. A print of just one took roughly 3 hours where a group of 5 took around 16 hours. PLA hotend temp was 215, bed 60

 

After hanging 15 of these I realized the slant design made it a pain to get these suckers leveled. I redesigned a new version where the mount holes are not at an angle. I would recommend using a drywall anchor or attach the non-angled mount to a stud.

Tags



Model origin

The author hasn't provided the model origin yet.

License