Desktop "Monitor"

This is work in progress. The project will use a Dayton Audio RS100-8 as a driver. The enclosure fits on a ender 3 sytle printer in 2 parts. It has about 12Liters of volume and will use a ~30x5,3cm port . It is that specific since that is the size of pvc tube I found at my hardware store. the port is now finally added

You can either use 50%+ Infill and waste a lot of hours or use 0-5% vertical only infill, make some small holes ontop and fill the insides of the wall with either Sand or Concrete.

I would also use extra thick walls and top/bottom

Since im not some sort of Designer it would be cool if some of you lads could make redesigns or remixes.

 I can add things like threads to screw it in or holes for threaded inserts. Or different sizes for pipes if you give me specific numbers.

Print Settings

Printer:

Elegoo Neptune 2

Rafts: 

No

Supports:

No

Resolution: 

0.3

Infill:

0%

Filament:

Wood Pla to look good

Notes:

I would really use a .6mm Nozzle unless you have 26hours/day maybe even a .8mm