Raspberry Pi 4 case for fan (or fun :))

A raspberry pi 4 case. A slightly modified version of the original https://www.thingiverse.com/thing:3723561.

I've added holes on the sides to have a better air flow around the CPU.

In the stl file you won't have the cable tie noches and the little hole in the top you can see in the picture.

(I can upload also that version if asked)

The bottom is as in the original version.

P.S. any suggestion is welcome

PPS: i suggest to use PETG as material as is a snap-in design, but also PLA can be used

Print Settings

Printer:

ProFab Mini

Rafts:

No

Supports:

Doesn't Matter

Resolution:

0.2

Infill:

10

Filament: