so i made a detailed instruction, but got timed out while editing and lost everything.
here are the key features:
with this thing you can convert your 1/24 losi micro sct to a trophy truck.
you'll need 20+ m2 screws and nuts. and also need to sacrifice a stock center driveshaft, have to cut it down to a length for the spur gear assembly.
You'll also need 4 pc of 45mm long links like the HK rocksta 1/24 crawlers links
and a telescopic driveshaft from some center motor micro crawler.
i also uploaded a full model with all parts fitted, as a mockup for you to be able to see how it should look like.. hope it helps. :)
feel free to contact me if you have any questions. i'll upload a more detailed instruction later with more photos.
Printer:
creality cr-10
Rafts:
No
Supports:
Yes
Resolution:
0.1-0.2
Infill:
10-100%
Notes:
print the axle housings at 0.1mm layer with 100% infill with support at the bearing grooves.
also print the motor spacers at 0.1mm layer
you can print the rest at 0.2mm layer with 10-20% infill w/o support.
Category: R/C VehiclesThe author marked this model as their own original creation. Imported from Thingiverse.