Tool Holder for Claw Hammer 20oz 035 I ENFORCE I for screws or peg board

Tool holder for 20oz claw hammers.

We provide two versions to download:

1. Screw: 4mm holes for standard screws for mounting on wooden or stoned walls
2. Pins: for peg boards of standard size

Sizes:

L - 119mm

W - 45mm

H - 48mm

We design all holders with much care. However due to the individual printing process we cannot guarantee a safe storage of tools and take no responsibility for any damages.

Print Settings

Printer Brand:

Anycubic

Printer:

All-metal Mega

Supports:

Doesn't Matter

Infill:

25%

Filament: GEEETECH PLA Black

Notes:

We have used the following settings:

* Material PLA black from GEEETECH * Layer height 0.2mm * Extruder 200° * Bed 60°

Custom Section

Optimized for American Claw Hammer 20oz with 2K fibreglass Handle from WIESEMANN 1893 | Art Nr 80508

We developed this holder for the 20oz claw hammer from our ENFORCE Series.

You find the product in our shop: https://wiesemann1893.com/collections/enforce-serie/products/latthammer-20oz

However the holder should be compatible with every other 20oz claw hammer of course =)

Claw Hammer 20oz - 80492 from WIESEMANN 1893

Custom Section

ENABLE 3D Project

We are currently working on downloadable holder models for all of our hand tools. If you have any suggestions of ideas feel free to send them directly to us at service@wiesemann1893.com =) https://www.wiesemann1893.com

Category: Tool Holders & Boxes