Any interest in making a mount for the TCS CS-105 or the LCC compatible booster also from TCS?
I saw a mention of this idea on the NMRA discord.
TCS Universal Wireless Throttle (UWT) Pockets
These throttle pockets hold your TCS UWT-100 & UWT-50 throttles. Two versions include cellphone holders as well.
4
64
2
364
updated August 24, 2022
Makes
Comments
Using the Prusa Slicer, I removed 5 mm from the Y axis, and now the throttle fits nicely. The two pictures show the new fit. Cheers.
Thank you for this printable. I really like the way it came out. I used my Prusa, with PLA from Prusament.
View one more comment
@Zerodameaon_333622 Hi. It fits nicely width wise, clearing the front buttons nicely, but depth wise, its a little loose. I would remove about 4-5 mm in depth. I was going to print another one, and use the slicer to adjust for that, and see how it fits, though I am busy at the moment with other prints.
@LeoPesce_372092 Thanks, I will try to bring it in a little.