Fully 3D Printed Hinged Clamp With Source

This is a parametric hinged clamp I designed in Fusion 360 to build some clamp-on hooks for a work table in my kitchen. The clamp itself, including hinge, prints as a single piece. In Fusion 360 you can change the inner diameter, wall thickness, screw size, etc. using parameters. You'll need to print the nut a little larger than the screw or vise-versa and if you change the size of the screw you'll need to re-apply the threads to both the nut and screw in Fusion 360.

Print Settings

Printer Brand:

LulzBot

Printer:

Mini

Rafts:

No

Supports:

No