Modified X-carve Dust Shoe for cnc4newbie 6" slide

This is a modified dust shoe from https://www.thingiverse.com/thing:1892044 . It's modified to fit cnc4newbie's xcarve slider. It uses the same hardware as the original

Here a few more modifications I did:

a) made the brush slots straight. Bending the brushes was giving me too many problems

b) adjusted the dimensions slightly on the top pieces

c) added screw holes on the TOP_back piece to leave room for the drag chain screws

d) sized the dust collector opening for a 3" fitting. I use a 3" to 4" adapter to connect a 4" line

e) changed it from a magnet to a slide in design. I left a slot for 2 magnets in the back, but I didn't bother. I just use pins where the lower bolts used to be, but I left the slot for the nut anyways. Magnets didn't like the weight of a 4" hose anyways.

The sketchup file is attached as well.