Voron V0.1 LDO Alignment Guide

I edited the jigs to work with LDO extrusions. I also added a 54mm version for the second extrusion. Not sure if it's needed but why not.

The (v0_z_rail_dual_align_x2.stl) is a copy from the Kirigami bed mount mod for the V0. https://github.com/christophmuellerorg/voron_0_kirigami_bed

This helps align the rails to each other taking out any deviation from the extrusions.

Print Settings

Printer:

Voron V0.1

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

40%

Filament: