My "ball bearing" doesn't really turn without force, it gets stuck somewhere a bit, printed it already with PETG and PLA both more or less the same with 0.2 mm; the "linear bearing" at the bottom doesn't turn at all with both material. Any idea what I could have don differently on my MK3S with Prusa Slicer?

E 4

Elwood

@Elwood_278297

printed it out but later realized that, as my filament rolls are in a shelf behind the printer, the guide does not work as it is pulled to the side by the filament. With the roll on top /above the guide it would work, I assume. for me unfortunately not. Thanks just the same.

G 15

Gareth S Hall

@GarethSHall

Love it, thanks for sharing. Reversed on the bar to align with filament and head a bit better. (edited)

DMBenware

@DMBenware

Only used one part, worked perfectly.

Matt B.

@MattB_106131

I printed this in Prusa PETG. Came out great, first time and very happy with the results.

Duncan Blackwell

@DuncanBlackwell

Printed out great using Sunlu PETG. Didn't work for my application as the filament is being fed too far from the back due to a badly drilled hole in the data cabinet I'm using. But the print itself is perfect. Shame I can't use it this time.