Z axis rod guide top for Voxelab Aquila printer

Designed up this Z axis rod guide to mount on the alu profile using 2 bearings 608 8x22x7 but with one is enough.

It's meant to make the rod straight. When mounting be sure you mount it at the same distance from the side as it is in the bottom. Use reference line (center) on the top to measure.

Printing:

I used 0.2mm layer high on PLA Strongman. I Printed with the Big hole up and the small hole on the bed used some support for the arrow shape.

Print Settings

Printer:

Voxelab Aquila

Rafts:

No

Supports:

No

Resolution:

200

Infill:

25

Filament:

AzureFilm PLA

blue

Category: 3D Printer Accessories