Stand for the Star Trek - Voyager by Sccuby

I made a stand for the excellent Star Trek - Voyager model by Sccuby. The stand is 200mm long, 60mm wide and 71mm high and designed for a make for the Star Trek - Voyager model by Sccuby and reduced in size to 40%

In the pictures, my model of  Voyager was printed at 40% for a total length of 333mm and my stand was designed for it.

If you make a different scale model of the Voyager the adjust the scale lenght of the stand to suit your ship. Simply multiply 5mm x % scale of your ship.  100% model would be  5x100=500mm long stand.  70% model would be 70x5mm=350mm long stand

If your printer is not big enough to make the stand in one, simply print stand a and b which have alignment pins. 

(PS if my scaling maths is wrong let me know)