Sorting Hat Bottle Opener Base British Version

This is a remix of Toddanglin's design where i increased the size of the hole to fit a British penny. 

BEWARE

There are two types of British pennies; one is made og bronze and one is made og Copper plated steel, and the height of these are different. Make sure to pick the right one

Bronze: 1.52mm 

Copper-plated steel: 1.65mm

Printing instructions (from toddaglin)

Opening a bottle puts lots of strain on the print, so use stronger settings than usual to avoid tearing the print apart the first time you use it. (Ask me how I know…)

Suggested settings with PLA:

• At least 25% infill with gyroid or cubic pattern (not unreasonable to use 100% infill for this application)
• 0.2 mm or better layer height
• 6 top/bottom solid layers
• 4 shells/walls

When slicing, add a pause just before the coin slot is covered so you can insert a penny (GBP). The coin will be permanently encased in the print (no glue required).