Flashforge Dreamer Palette 2 PTFE Mounting Bracket

2 Material mounting bracket to attach the Palette 2 to a FlashForge Dreamer at any extruder (unfortunately, the…
0
13
0
152
updated August 10, 2022

Description

PDF

2 Material mounting bracket to attach the Palette 2 to a FlashForge Dreamer at any extruder (unfortunately, the bracket for the Creator Pro did not work...)

Parts attached:

  • "Fuss": counter bracket to give more support when adding the PTFE tube for printing
  • "Halter": base plate for the backet
  • "Gummi x.x": TPU component to stick the PTFE tube in

The "Gummi" part offers several diameters, select the one matching your PTFE tube to make plugging / unplugging more comfortable. Tests with 4.8mm diameter showed a tight fit when plugging in, but almostimpossible to remove the tube again (which is necessary to remove remaining filament after a print):

  • FFD Palette Gummi 5.0 ==> 5.0mm diameter
  • ... 5.5 ==> 5.5mm diameter
  • ... 6.0 ==> 6.0mm diameter

Suggest to print them all and test the fit of the tube prior to installation

"Halter" offers a M4 thread to ease handling and printing of all parts feel free to replace or even remove completely in case your bracket has enough rigidity. Tests with a first version showed the PLA bending over a 6h print

What you need else

Since the modification is an "add-on" to the hotend lid, you'll need to replace the 2 M3x15 screws securing the plastic part on top of the carriage by 2 M3x20 screws.

Category: 3D Printer Accessories

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License