Amazon Echo Input Wall Mount

For everybody who ever wanted to attach the new AmazonEcho Input to a wall - Step format attached for easier remixing and modifications

Version 2 featuring 3,5mm headphone / speaker jack

Have fun!

Print Settings

Printer:

Alfawise U30 Pro

Rafts:

No

Supports:

Yes

Resolution:

0,2mm layer height

Infill:

15%

Filament:

Nothing special... PLA, PETG, ABS, ... Color according wall

Notes:

Print the part as designed flat on bed surface and add support structures on the sides - worked for me in PLA.

Used 15% infill - you can try less, but keep in mind, Echo Input will be "press fit" a bit into the mount, so make sure the material is stable enough to take the mechanical load.

Post-Printing

Remove Support

remove support structures under the "wings" and in the through hole - that's it!

Wall Mount

Use a 4x30 SPAX screw (or something fitting the screw head) - should perfectly fit the hole and not block the Echo Input from being inserted.

Category: Computer