*UPDATE* I have a newer design posted that mounts on the left side and does not require a longer cable.
https://www.printables.com/model/257460-ender-3-s1-zero-offset-cr-touch-mount
Like many others I was having issues with the automatic bed leveling on the Ender 3 S1, David's design resolved my issue by placing the probe inline with the nozzle on the Y axis.
I remixed the model to utilize the original mounting screws and move the probe a little closer to the nozzle on the X axis. You will need a longer cable to connect the probe in the new position, I measured the following probe offset on my printer.
x_offset: 40
y_offset: 0
The author remixed this model.