Novritsch ssp 18 auto pistol suppressor for looks

It is a suppressor for the Novritsch ssp 18 auto pistol. If you want it to work add something to the inside of it.
3
22
0
488
updated August 9, 2022

Description

PDF

PETG would be the best to print in but I did PETG for the screw part and gray pla for the rest. it took about 60 sec to put together but the gule had to dry

print the main body so it has the bb exit hole down as seen in the picture. Also, cut the top of the screw part off as seen in the picture. and I would recommend using a brim on the ring.


The parts go the Screw part then the ring then the main body. and I used supper glue as a adhesive.

Model origin

The author hasn't provided the model origin yet.

License