Printed in 6h 38m laying down with a brim just incase and 0.08mm layers, ive tried standing litophanes but lying down yields the best results by far, just gotta get that first layer really good or it will show up in the picture.
Stranger Things lamp
Stranger things rotational lithophane lamp
57
284
3
1970
updated October 27, 2022
Makes
Comments
For me images does not seems to be clean as I expected... I am using LED strip for inner-light, and transparent PLA/PETG.
@Dawe_127664 Transparent filament is not suitable for lithophanes. I would recomend you to use white or any light color PLA. If you will try to print some of these litho-image again, you can semd me screenshot from yor slicer. I could check that to be sure we are using same settings for litho printing.
@Marasig Thx, I'm now printing from transparent PLA with your g-code and it's looking much better... I will try glue some paper on opossite site, to make it more opaque.
Hi, thank you for a model, it's great.
Are there any alternative for litography of Vecna? I want to make it for a 10yo child.
View 2 more comments
@Marasig Thank you very much. I didn't expected so quick response.
I'll try it in next days, I've to wait until my current print finishes.
Will you do second alternative as well? They are two Vecna litography files (2,3).
@Marasig I just printed it successfully, it's looking good, but I don't have frame yet, to try if fits, but it looks same as previous lito, so it shoud be fine.
what material do you recommend for the lithopane prints? (color of pla?)
@Magic007dx_347488 I printed it from white.