Filament Coil Holder/Spool

A little holder for filament coils or leftover filaments.

6h 15m

4× print file

0.20 mm

0.40 mm

82.00 g

380

updated December 23, 2022

Description

Why

Handy if you have lots of spools with a little bit of filament, or you can use it if you have a lot of filament coils everywhere.

Assembly

It should press-fit together, if it doesn't, sand it a little bit until it does press-fit. On my Prusa Mini this wasn't necessary.

Print settings

Layer height: 0.2 mm

Perimeters: 6

Infill: 100%

Material: PLA

The author marked this model as their own original creation.