My daughter is into her Anime, I've been working on sun catchers of late. So ... here's Calcifer.
49
144
0
1978
updated March 12, 2020

Description

PDF

My daughter is into her Anime, I've been working on sun catchers of late. So ... here's Calcifer.

This is a sun catcher printed without fancy multi-material mechanisms.

The frame acts like the lead in a stained glass window. It needs to be printed in transparent filament with a change to black at the layer where the lead lines would be.

Once completed, the coloured pieces are then glued into the relevant "gaps" in the frame. I used PVA glue and allowed it to set over a number of days.

The tolerances are really tight, so you may need to sand the parts down a little to make them fit depending on your printers tolerances.

Print instructions

Category: 2D Art Print Settings

Printer Brand: Prusa

Printer: i3 MK3

Rafts: No

Supports: No

Resolution: 0.1mm

Filament: N/A PLA / PET
Notes:

It needs to be printed in transparent filament with a change to black at the layer where the lead lines would be.

Smaller parts may need a brim.

Care must be taken when removing from the print bed as they are between 0.5mm and 1.0mm thick.

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License