In this project you have available 2 models
Cover
If you broke clips on top cover(what is really easy to do) you can replace top cover with this one.
Cover can hold without screws only by friction between plastics, but recommending to fix it with 2 M3x10 screws, best with flat head.
You can post process top surface with sandpaper to increase aerodynamic.
Mount
If you want to create your own attachment for M2E/D, you can use this model in STEP format as baseline. This Mount model is significantly thicker than Cover.
Recommending to use same printing direction as is designed, since in this way you will not suffer from reduced strength between layer bonds.
Fixing is designed for 2 M3x12 screws.
Printer Brand:
TEVO
Printer:
Tornado
Rafts:
No
Supports:
No
Notes:
Print settings:rn- Models are optimised for max 0.4mm nozzle. rn- Recommending to use brims because of small bottom surface area.rn- Support geometry is included in geometry
Category: R/C VehiclesThe author marked this model as their own original creation. Imported from Thingiverse.