Raspberry Pi Pico PicoProbe Enclosure

When I started working with the Raspberry Pi Pico, I wanted to make a PicoProbe for easier code debugging.  I came across an excellent case for the PicoProbe that was designed by Alan Reed.  His site contains a great writeup of the design of the case and of the PicoProbe in general.  However, I wanted to use parts I had on hand, so I modified Alan's design (with his permission) as follows:

• Added a restart switch to restart the PicoProbe when it hangs or when updating its software.
• Enlarged the light pipe diameter to suit what I had on hand.
• Replaced the JST output connectors with a single DB-9 connector.
• Enlarged the Raspberry Pi logo and made it cut completely through the lid for better ventilation.
• Replaced Alan's name with a larger PicoProbe label (sorry Alan).
• Reworked the button pusher to not need print support.

Note that the SCAD file requires the use of the OpenScad D-Sub Library that can be found HERE.

I printed all of the parts at 0.2mm with 20% infill and no support.