A simple housing for
LILYGO® TTGO T5 V2.0 WiFi Wireless Module bluetooth ESP32 2.13 e-Paper Display Development Board
2 Buttons and hole for switch supported. Micro-USB also accessible.
4 Screws M3 needed for closing.
I simply glued the epaper board with 3 dots of hot glue.
The bottom part has space for up to 3.7V/1000mAh Lipo Battery like this one:
https://hobbyking.com/de_de/turnigy-1000mah-1s-20c-lipoly-single-cell.html
I fixed the battery at the bottom with 2 side adhessive tape.
If you like the Wheather Program shown on the display you can use the attached Arduino Sketch "My_OpenWeather_generic.ino".
For usage you need to sign up for a key and read API configuration info here:
// https://openweathermap.org/
This is a modified version of Bodmers Sketch from https://github.com/Bodmer/OpenWeather
Just edit lines 80, 81 for you WiFi settings, set your location around lines 92-110 and your language in line 114.
The update of the display performs 5 inversion switchings. If you find out how to get rid of these flickers please post me a hint ;-)
Printer:
Franx 3D Printer
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
20
Filament:
Das Filament PLA
Notes:
Use Blocker_Top.stl to suppress some supports in Cura
Category: ElectronicsThe author marked this model as their own original creation. Imported from Thingiverse.