Small clipboard with pen holder
Because my co-workers are always stealing my clipboard, I designed a clip for a small clipboard.
I have now printed so many that everyone has one (or maybe two?).
For the competition I have still designed the matching pen holder.
This works with all kinds of pens - not only Sharpies ...
Please print in PETG with four perimeters.
Assembly instructions
You need two M4 nuts, two screws M4 15 mm total length. For A5 sheet size, one board 170 x 237 mm. Also two clothespins.
![]() | ![]() |
Remove the springs from the clothespins.
Press the two M4 nuts into the bottom part.
Place the two springs on the upper part and insert the upper spring arm into the hole.
The easiest way is to use pliers.
Place the upper part on the lower part and insert the other spring arm into the upper part.
Fold together so that the two springs fit into the round recess.
Drill two holes in the board and screw the holder to the board.
Fold the pen clip so that the flat sides are on top of each other and clip it into the groove.
The author hasn't provided the model origin yet.