Gridfinity post-it sticky notes stack container

UPDATE:  I have now added a version of the model with no magnet holes in the base. This will save you circa 15 minutes of print time a couple of grams of filament. If you don't need magnet holes (As I expect most dont), then the no-magnet-holes version of the STL is the one I recommend you use.

Features:

• Can contain approximately 3 standard packs of post-its
• Gaps arounds sides so that you can easily remove the packs of post-its
• Gaps also save filament and print time
• A bit of wiggle room, for comfort
• Can also receive another 2x2 module on top of its very self