can you make one for the switch lite ?
Nintendo Switch Back Replacement
I wanted to make a transparent back for my Nintendo Switch, so I measured and modeled a replacement for it.
83
810
1
3669
updated August 1, 2022
Makes
Comments
the model looks great I 3d printed it everything turned out great i took apart the back and the screw holes were not lined up please type back
@MaxTucholka_1296020 I recall struggling with the screws as well, so I'm almost certain I got some measurement wrong...
If you (or anyone else) re-measures the screw positions and can provide the error, I'll happily update the model
@BryceDixon all I know as of right now is all of the screw holes were more to the left.
Could you make an OLED version? Or know where I can find one? Thanks!
@Brazien I've thought about it, but don't want to risk taking apart my OLED to perform all the necessary measurements or potentially strip anything by test fitting with Nintendo's self-tapping screws...
The main reason I decided to do this one was because I already had to replace the fan and the kickstand was already broken, so there wasn't much to lose. Really, though, this only took me 4 versions with a few hours and calipers.
But you still can access the SD card, right?
@Gorroth1007 Correct! It just no longer has a cover.
