Honda lawn mower hour meter mount

Honda hour meter mount
1
12
0
396
updated July 30, 2022

Description

PDF

This is an hour meter mount for specifically Honda mowers.

All hour meters are pretty much the same on amazon, This mount will bolt it to the handle bars without drilling holes. Print the 2 parts out horizontally sideway if you will.

I painted the inside part of mine with liquid tape so it wouldn't rub on the metal.

Parts need 6 m3 x 20mm hex screws and 6 nuts.

This is quite difficult to install, it has to go on upside down at first. Maybe you can improve this.

1) put top bracket on the bars facing down with 2 nuts in the center holes.
2) put the bottom bracket on top and put 1 nut in the hex hole.
3) put a 20mm screw from the underside into the top. You do this upside down so the nuts don't fall out. Do this for all 4 outside holes. Lightly tighten as you will have to turn the bracket right way up.
4) put the wire on the plug run it up and around where you can to the bracket
5) put the meter on the wire and 1 bolt started on the bracket.
6) slide the meter up and down on the other side then fully tighten the 4 outside bolts. You'll see what i mean when you actually do this.
7) Put the last screw on the other side of the meter. you can you a 2mm hex wrench to poke the bolt up so the 20mm bolt can reach it. Tighten the 2 bolts down

Model origin

The author hasn't provided the model origin yet.

License